Standard Shower Outlets from Caroflow

Wet-Room Drains are available with a horizontal or vertical take-off, the depth of the whole unit is 155mm (vertical spigot) or 160mm (horizontal spigot); small enough to be installed within the space formed by 150mm joists, when supported on a suspended wooden floor. The unit will drain at a constant rate of 0.75 litres per second and provides a full 50mm water trap.

Standard Shower Outlet - Materials

The Caroflow Standard Shower Outlet bodies and clamp/trap sets are manufactured in pre-treated, electrostatically powder coated diecast LM6 Aluminium silicon alloy to BS1490:1970, with stainless steel fixings.

Standard Shower Outlet - Dimensions and Connections

Both the vertical and horizontal versions will allow direct connection to 40mm (1.5 inch) solvent weld pipe to BS5255 or to a push-fit EN1329 using proprietary pipe manufacturers fittings. Dimensions are given below. On the horizontal outlet KÖSTER AQUATECNIC recommend that you allow an extra 5mm depth (total 160mm) to accomodate the mouth of the outlet. 

             Vertical Spigot

Standard Shower Outlet - Performance Rating

Caroflow Standard Shower Outlets have been tested and achieve a constant flow rate in excess of 0.75 litres when connected to a 40mm (1.5") pipe.

Standard Shower Outlet - Example Specification

Caroflow horizontal spigot trapped shower outlet for tiled floor with polished stainless steel tile set. Product ref: SDHS/40/T SSP, all as supplied by  KÖSTER AQUATECNIC Limited tel: 0845 2268283. 

Standard Shower Outlet - Tile Set and Grate Options

The Standard Shower Outlets can be supplied with either a white circular grating (vinyl floor) or one of the four Caroflow tilesets (for tiled floor).  

To view prices and purchase Standard Shower Outlets

Contact us by phone or email for friendly expert advice