Home Shower Tray Formers Wetroom Installation

How to Install a Wet-Room Floor Shower Tray Former


The following information is intended to provide an easy to understand pictorial guide to the steps needed to create a wet-room floor (to view larger images please click existing image). They are not intended to replace the full application instructions which must be read before installation is started.

KÖSTER AQUATECNIC would like to thank Bathroom Matters Ltd for kindly supplying the pictures for this sequence.

Prepare sub-floor, install extra noggins.
  Prepare floor
Install waste support within joist space, fit flat floor area (24mm marine ply).  Install waste support
Fit supplied wet-floor waste into waste support and connect pipework.   Plumb in waste
Fit Shower Tray Former in accordance with application instructions and make good around edge of former if necessary.   Install OTL shower tray former
Fit Aquaproof tape, corners and sleeves in accordance with full application guidelines.
  Apply Aquaproof tape, corners and sleeves

Fully waterproof room with Aquaproof system, clamp Shower Outlet Sleeve into position with membrane clamping ring. 

To find out the amount of  waterproofing/ tanking materials you require to tank your wet room please refer to our  Wetroom Waterproofing Material Calculations Guide which will open as a pdf in a new window.

  Apply Aquaproof compound
Tile from waste outwards treating the tileset frame as your first tile.   Fit tileset and tile as normal
Place the Tileset into frame.
  The finished project. Thanks to bathroom matters.

























































Contact us by phone or email for friendly expert advice
  		 

Shopping Cart


Your Cart is currently empty.

Wetroomexpert Blogs

How do I decide which Waterproofing Product to buy and How much will I Need?

Having decided to install a wet room you then have a number of decisions to make regarding your choice of waterproofing / tanking

Read more

Wet-Room Design

Wet-rooms can be designed to fit small or large spaces and often provide a simpler and more practical solution than trying to accommodate a

Read more

Wet Room Tanking - Key Considerations

Tanking a wet room is the process needed to make a wet room waterproof and it is vital this is done with an appropriate product which will

Read more

Build a Wet Room on the First Floor ?- Yes you can!

It is possible to build a wet room on any level of a building you simply need to know how. During my 15 years involvement with waterproofing

Read More