How to Tank a Wet Room - Aquaproof Installation Guidelines for Waterproofing Wet Rooms

The following pictures show the steps needed to fully waterproof (tank) a wet-room using Aquaproof Waterproofing System.

Once these stages are completed your wet room will be waterproofed and ready to tile.

Walls and floor of wet room are primed with Aquaproof primer.

Aquaproof tape is bedded into a freshly applied stripe coat of Aquaproof compound at all corners and joints.

Pipe sleeves are pushed over pipe entries and bedded into fresh Aquaproof compound.

Shower outlet sleeves are bedded into Aquaproof Compound and dressed down in to the shower outlet (between the outlet body and clamping ring).

Pre-formed corners are bedded into fresh Aquaproof compound.

All tapes, corners and sleeves are overpainted with a generous layer of Aquaproof compound.

Finally 2-3 coats of Aquaproof compound are applied to the entire area to be waterproofed.

Your Cart is currently empty.

Wet-rooms can be designed to fit small or large spaces and often provide a simpler and more practical solution than trying to accommodate a

Tanking a wet room is the process needed to make a wet room waterproof and it is vital this is done with an appropriate product which will

It is possible to build a wet room on any level of a building you simply need to know how. During my 15 years involvement with waterproofing